change wrong naming in comment

Makefile

@@ -1,5 +1,5 @@
 PRG            = rgbyteclock
-OBJ            = rgbyteclock.o timer.o lcd.o main.o rtc.o spi.o ringbuffer.o crc.o ledcontroller.o
+OBJ            = rgbyteclock.o timer.o lcd.o main.o rtc.o spi.o ringbuffer.o crc.o ledcontroller.o led1642gw.o
 MCU_TARGET     = atmega164a
 OPTIMIZE       = -Os
 
@@ -27,6 +27,8 @@ $(PRG).elf: $(OBJ)
 # dependency:
 rgbyteclock.o: timer.o lcd.o rgbyteclock.h rtc.o spi.o ledcontroller.o
 main.o: rgbyteclock.o lcd.o spi.o ledcontroller.o rtc.o timer.o
+ledcontroller.o: led1642gw.o
+led1642gw.o: led1642gw.h led1642gw_config.h
 timer.o: timer.h
 lcd.o: lcd.h timer.o
 rtc.o: rtc.h
@@ -49,5 +51,9 @@ bin:  $(PRG).bin
 	$(OBJCOPY) -j .text -j .data -O binary $< $@
 
 prg: $(PRG).bin
-	python2 ../megaHidProg/megaHidProg.py -C -c 1000 -t 4 -b $(PRG).bin 
+	#python2 megaHidProg.py -C -c 1000 -t 4 -b $(PRG).bin 
+	python2 ./megaHidProg.py -C -c 3000 -t 15 -b $(PRG).bin -T 15 -V $(PRG).bin
+
+setfuses:
+	python2 megaHidProg.py -C -S -c 125 -L be -H d9 -E FC
 

lcd.c

@@ -50,6 +50,10 @@
 // !!!!!!!
 
 
+#define T_TIMEOUT (10)
+
+static uint8_t lcd_initialized;
+
 
 static inline uint8_t lcd_read_byte(uint8_t RS)
 {
@@ -79,14 +83,19 @@ static inline uint8_t lcd_read_byte(uint8_t RS)
 }
 
 
-static inline void lcd_wait_while_busy(void)
+static inline int8_t lcd_wait_while_busy(void)
 {
   
   uint8_t byte;
+  uint32_t t_enter = timer_get();
+
   do {
+	if (timer_get() > t_enter + T_TIMEOUT) {
+		return 0;
+	}
     byte = lcd_read_byte(0);
   } while (byte & 0x80);
-  return;
+  return 1;
 }
 
 
@@ -105,9 +114,9 @@ static inline void send_nibble(uint8_t nibble)
   * \param byte The byte to send to the LCD
   * \param RS specifies whether byte sent is data (RS==1) or command (RS==0)
   */
-static inline void lcd_send_byte(uint8_t byte, uint8_t RS)
+static inline int8_t lcd_send_byte(uint8_t byte, uint8_t RS)
 {
-  lcd_wait_while_busy();
+  if (lcd_wait_while_busy() ) {
 	  if (RS)
 		  LCD_DATA_MODE();
 	  else
@@ -116,29 +125,42 @@ static inline void lcd_send_byte(uint8_t byte, uint8_t RS)
 	  send_nibble(byte >> 4);
 	  _NOP();
 	  send_nibble(0x0f & byte);
+	  return 1;
+  }
+  return 0;
 }
 
 
 int lcd_get(void)
 {
-  lcd_wait_while_busy();
+	if ( lcd_wait_while_busy() ) {
 		return lcd_read_byte(1);
-
+	}
+	return -1;
 }
 
 int lcd_put(char c)
 {
-  lcd_send_byte(c, 1);
+	if (!lcd_initialized) {
 		return 0;
 	}
+	return lcd_send_byte(c, 1);
+}
 
 void lcd_puts(char *s)
 {
+	if (!lcd_initialized) {
+		return;
+	}
+	
   while (*s) {
     //lcd_put(*s++);
-    lcd_send_byte(*s++, 1);
+	  if (!lcd_send_byte(*s++, 1)) {
+		  return;
 	  }
   }
+  return;
+}
 
 void lcd_cursor(uint8_t blink)
 {
@@ -160,6 +182,8 @@ void lcd_init(void)
    * display we be set to 4-bit data mode
    */
   
+	lcd_initialized = 0;
+
   // wait until LCD gets ready to accept instructions.
   timer_wait(50);
 
@@ -189,7 +213,11 @@ void lcd_init(void)
 
   // set to 5 x 8 dots per character,
   // 16 characters per line, 2 lines
-  lcd_send_byte(0x28, 0);
+  int success = lcd_send_byte(0x28, 0);
+
+  if ( !success ) {
+	  return;
+  }
 
   // enable display, no cursor, no blinking
   //lcd_send_byte(0x0c, 0);
@@ -205,6 +233,8 @@ void lcd_init(void)
   // clear dislay
   lcd_clear();
 
+  lcd_initialized = 1;
+ 
   return;
 }
 
@@ -215,6 +245,10 @@ void lcd_clear(void)
 
 void lcd_locate(uint8_t row, uint8_t col)
 {
+	if (!lcd_initialized) {
+		return;
+	}
+
   if (row)
     col += 0x40;
   lcd_send_byte(0x80 + col, 0);

led1642gw.c

@@ -0,0 +1,248 @@
+
+
+/*
+ * ----------------------------------------------------------------------------
+ * "THE BEER-WARE LICENSE" (Revision 42):
+ * <struppi@struppi.name> wrote this file. As long as you retain this notice you
+ * can do whatever you want with this stuff. If we meet some day, and you think
+ * this stuff is worth it, you can buy me a beer in return.
+ * (c) 2014 Stefan Rupp
+ * ----------------------------------------------------------------------------
+ */
+
+
+#include <string.h>
+#include "led1642gw.h"
+
+#include "led1642gw_config.h"
+
+
+#define NUM_LED1642GW_CHANNELS (16) // number of LED channels per IC
+
+//total numer of channels. needed to calculate the buffer size.
+#define NUM_LED_CHANNELS (NUM_LED1642GW_CHANNELS*NUM_LED1642GW_ICs)
+
+
+/* The buffer to hold the LED values.
+ * The data in this buffer can be manipulated with
+ * e.g. led1642gw_set().
+ * calling led1642gw_flush() sends the data in this buffer
+ * the data registers of the LED1642 ICs.
+ */
+static uint16_t ledbuffer[NUM_LED_CHANNELS];
+static uint16_t config_reg[NUM_LED1642GW_ICs];
+
+/*
+ * Write 16 bits of \data, with LE set high
+ * for the number of clock cycles specified in \le_clocks.
+ * MSB comes first, LSB is last.
+ */
+static void write_data(uint16_t data, uint8_t le_clocks)
+{
+  uint16_t mask = 0x8000;
+  int8_t bit;
+
+  SET_CLK_L(); 
+  SET_LE_L();
+  for (bit=15; bit>=le_clocks; bit--) {
+    if(data&mask) { SET_SDI_H(); }
+    else { SET_SDI_L(); }
+	SET_CLK_H();
+    mask >>= 1;
+	SET_CLK_L(); 
+  }
+  
+  SET_LE_H();
+  for (/*noting to initialize*/; bit>=0; bit--) {
+    if(data&mask) { SET_SDI_H(); }
+    else { SET_SDI_L(); }
+	SET_CLK_H();
+    mask >>= 1;
+	SET_CLK_L();
+ }
+  
+  // set all pins to low after transmission
+  //SET_CLK_L();
+  SET_LE_L();
+  SET_SDI_L();
+  
+}
+
+
+/*
+ * Write data to BRIGHTNESS DATA LATCH register.
+ * that means setting LE high for 3 or 4 clock cycles
+ */
+static void write_data_latch(uint16_t data)
+{
+  write_data(data, 4);
+}
+
+
+/* 
+ * Write data to BRIGHTNESS GLOBAL LATCH register.
+ * that means setting LE high for 5 or 6 clock cycles
+ */
+static void write_global_latch(uint16_t data)
+{
+  write_data(data, 6);
+}
+
+
+/*
+ * This function shifts data through the 16bit shift
+ * register of the LED1642GW, without writing the data
+ * to any internal register of the IC.
+ * This way, we can daisy chain an bunch of LED1642GW ICs,
+ * and still get data through to any of those.
+ */
+static void write_no_command(uint16_t data)
+{
+  write_data(data, 0);
+}
+
+
+/*
+ * Write data to CONFIG register.
+ * that means setting LE high for 7 clock cycles
+ */
+void led1642gw_flush_config()
+{
+  uint8_t ic;
+  for (ic=0; ic<(NUM_LED1642GW_ICs-1); ic++) {
+    write_no_command(config_reg[ic]);
+  }
+  write_data(config_reg[ic], 7);
+}
+
+
+/* 
+ * Turn all channels on, so the data in the DATA LATCH 
+ * register affects the LEDs attached to the IC.
+ */
+void led1642gw_turn_all_on(void)
+{
+  
+  uint8_t ic;
+  for (ic=0; ic<(NUM_LED1642GW_ICs-1); ic++) {
+    write_no_command(0xffff);
+  }
+  write_data(0xffff, 2);
+}
+
+
+/* 
+ * Turn all channels off,
+ */
+void led1642gw_turn_all_off(void)
+{
+  uint8_t ic;
+  for (ic=0; ic<(NUM_LED1642GW_ICs-1); ic++) {
+    write_no_command(0x0000);
+  }
+  write_data(0x0000, 2);
+}
+
+
+void led1642gw_set_gain(uint8_t gain)
+{
+
+  if (gain > 0x3f) {
+    gain = 0x3f;
+  }
+  
+  uint16_t g = gain;
+
+  for (uint8_t ic=0; ic<(NUM_LED1642GW_ICs); ic++) {
+    config_reg[ic] &= ~(0x003f);
+    config_reg[ic] |=  g;
+  }
+
+}
+
+
+void led1642gw_set_current_mode(uint8_t mode)
+{
+	uint16_t mask = (1<<6);
+
+  for (uint8_t ic=0; ic<(NUM_LED1642GW_ICs); ic++) {
+    if (mode) { config_reg[ic] |= mask; }
+    else { config_reg[ic] &= ~mask; }
+  }
+}
+
+/*
+ * Initialize the pins of the ATMega processor
+ * to drive the data signals to the ICs
+ * and initialize the LED buffer to zero.
+ */
+void led1642gw_init(void)
+{
+
+  SET_CLK_L();
+  SET_SDI_L();
+  SET_LE_L();
+  DDR_CLK |= (1<<PIN_CLK);
+  DDR_SDI |= (1<<PIN_SDI);
+  DDR_LE |= (1<<PIN_LE);
+  memset(ledbuffer, 0x00, sizeof(ledbuffer));
+  memset(config_reg, 0x00, sizeof(config_reg));
+  led1642gw_flush_config();
+  led1642gw_flush();
+}
+
+
+/*
+ * Transmit data from the ledbuffer to the BRIGHTNESS latches of
+ * the LED driver ICs.
+ * Let's assume, we have n LED1642GW ICs daisy chained. Then
+ * we write n-1 times with write_no_command, to shift all
+ * data through the 16bit shift registers of each of the ICs.
+ * Then we once write with write_data_latch to store the data
+ * in the BRIGHTNESS DATA registers of the respective ICs.
+ * We do this for all but the last set of brightness data,
+ * where we don't write to the DATA LATCH, but to the GLOBAL DATA LATCH.
+ */
+void led1642gw_flush(void)
+{
+  uint8_t channel;
+  uint8_t ic;
+
+  // for each of the first 15 channels, do the following:
+  for (channel=0; channel<NUM_LED1642GW_CHANNELS; channel++) {
+    // shift data throught the first n-1 ICs with write_no_command
+    for (ic=0; ic<(NUM_LED1642GW_ICs-1); ic++) {
+      write_no_command(ledbuffer[channel+(NUM_LED1642GW_CHANNELS*ic)]);
+    }
+    // then, when the brightness data has propagated through the
+    // shift registers, write all data into the DATA LATCH of
+    // all of the ICs.
+    // for the 16th channel, we don't write to the DATA LATCH, but
+    // to the CLOBAL data latch.
+    // once more, we do the trick with write_no_command, to 
+    // shift data through all the ICs
+    if (channel < NUM_LED1642GW_CHANNELS-1) {
+      write_data_latch(ledbuffer[channel+(NUM_LED1642GW_CHANNELS*ic)]);
+    }
+    else {
+      write_global_latch(ledbuffer[(ic*NUM_LED1642GW_CHANNELS)-1]);
+    }
+  }
+}
+
+
+void led1642gw_set_channel(uint8_t channel, uint16_t value)
+{
+  if (channel < NUM_LED_CHANNELS) {
+    ledbuffer[channel] = value;
+  }
+
+}
+
+
+void led1642gw_clear(void)
+{
+  memset(ledbuffer, 0x00, sizeof(ledbuffer));
+}
+
+

led1642gw.h

@@ -0,0 +1,30 @@
+
+
+/*
+ * ----------------------------------------------------------------------------
+ * "THE BEER-WARE LICENSE" (Revision 42):
+ * <struppi@struppi.name> wrote this file. As long as you retain this notice you
+ * can do whatever you want with this stuff. If we meet some day, and you think
+ * this stuff is worth it, you can buy me a beer in return.
+ * (c) 2014 Stefan Rupp
+ * ----------------------------------------------------------------------------
+ */
+
+
+#ifndef LED1642GW_H_
+#define LED1642GW_H_
+
+#include <avr/io.h>
+#include <stdint.h>
+
+void led1642gw_init(void);
+void led1642gw_turn_all_on(void);
+void led1642gw_turn_all_off(void);
+void led1642gw_flush(void);
+void led1642gw_set_channel(uint8_t channel, uint16_t value);
+void led1642gw_clear(void);
+void led1642gw_flush_config(void);
+void led1642gw_set_gain(uint8_t gain);
+void led1642gw_set_current_mode(uint8_t mode);
+
+#endif // LED1642GW_H_

led1642gw_config.h

@@ -0,0 +1,28 @@
+
+#ifndef LED1642GW_CONFIG_H_
+#define LED1642GW_CONFIG_H_
+
+#define NUM_LED1642GW_ICs (3)
+
+#define DDR_CLK (DDRC)
+#define PORT_CLK (PORTC)
+#define PIN_CLK (3)
+#define SET_CLK_H() ((PORT_CLK) |=  (1<<(PIN_CLK)))
+#define SET_CLK_L() ((PORT_CLK) &= ~(1<<(PIN_CLK)))
+
+#define DDR_SDI (DDRC)
+#define PORT_SDI (PORTC)
+#define PIN_SDI (4)
+#define SET_SDI_H() ((PORT_SDI) |=  (1<<(PIN_SDI)))
+#define SET_SDI_L() ((PORT_SDI) &= ~(1<<(PIN_SDI)))
+
+#define DDR_LE (DDRC)
+#define PORT_LE (PORTC)
+#define PIN_LE (2)
+#define SET_LE_H() ((PORT_LE) |=  (1<<(PIN_LE)))
+#define SET_LE_L() ((PORT_LE) &= ~(1<<(PIN_LE)))
+
+
+
+#endif // LED1642GW_CONFIG_H_
+

ledcontroller.c

@@ -17,16 +17,12 @@
  */
 
 #include "ledcontroller.h"
-#include <string.h>
-#include <util/delay.h>
-
-
-#define NUM_LED1642GW_ICs (3)
-#define NUM_LED1642GW_CHANNELS (16)
-#define NUM_LED_CHANNELS (NUM_LED1642GW_CHANNELS*NUM_LED1642GW_ICs)
-
-static uint16_t ledbuffer[NUM_LED_CHANNELS];
+#include "led1642gw.h"
 
+/*
+ * Application specific mapping of LEDs and there respective color channels
+ * to the respective channels of the three LED1642GW ICs.
+ */
 static int8_t map_lednum_to_channels(uint8_t lednum, uint8_t *channel_r, uint8_t *channel_g, uint8_t *channel_b)
 {
   uint8_t ret=0;
@@ -114,127 +110,131 @@ static int8_t map_lednum_to_channels(uint8_t lednum, uint8_t *channel_r, uint8_t
 
 }
 
-
-static void write_data(uint16_t data, uint8_t le_clocks)
-{
-  uint16_t mask = 0x8000;
-  int8_t bit;
-  PORTC &= ~(1<<PC2);
-  for (bit=15; bit>=le_clocks; bit--) {
-    PORTC &= ~(1<<PC3);
-    if(data&mask) { PORTC |= (1<<PC4); }
-    else { PORTC &= ~(1<<PC4); }
-    PORTC |= (1<<PC3);    
-    mask >>= 1;
-  }
-  
-  PORTC |= (1<<PC2);
-  for (/*noting to initialize*/; bit>=0; bit--) {
-    PORTC &= ~(1<<PC3);
-    if(data&mask) { PORTC |= (1<<PC4); }
-    else { PORTC &= ~(1<<PC4); }
-    PORTC |= (1<<PC3);    
-    mask >>= 1;
- }
-
-  PORTC &= ~(1<<PC3);
-  PORTC &= ~(1<<PC2);
-  PORTC &= ~(1<<PC4);
-}
-
-
-static void write_data_latch(uint16_t data)
-{
-  write_data(data, 4);
-}
-
-static void write_global_latch(uint16_t data)
-{
-  write_data(data, 6);
-}
-
-static void write_no_command(uint16_t data)
-{
-  write_data(data, 0);
-}
-
-
-void ledcontroller_turn_all_on(void)
-{
-  
-  write_data(0xffff, 2);
-  _delay_us(10);
-  write_data(0xffff, 2);
-  _delay_us(10);
-  write_data(0xffff, 2);
-  _delay_us(10);
-}
-
-
-void ledcontroller_turn_all_off(void)
-{
-  
-  write_data(0x0000, 2);
-  _delay_us(10);
-  write_data(0x0000, 2);
-  _delay_us(10);
-  write_data(0x0000, 2);
-  _delay_us(10);
-}
-
-
-void ledcontroller_init(void)
-{
-
-  PORTC &= ~(1<<PC3); // SCK
-  PORTC &= ~(1<<PC4); // DATA
-  PORTC &= ~(1<<PC2); // LE
-  DDRC |= (1<<PC3); // SCK
-  DDRC |= (1<<PC4); // DATA
-  DDRC |= (1<<PC2); // LE
-  memset(ledbuffer, 0x00, sizeof(ledbuffer));
-  led_flush();
-}
-
-
+/*
+ * set one RGB LED to a RGB value.
+ * This only changes the Red, Green and Blue values in the
+ * internal LED buffer, the physical LED will still remain in its previous
+ * state, until you call led_flush().
+ */
 void led_set(uint8_t lednum, uint16_t red, uint16_t green, uint16_t blue)
 {
 	uint8_t c_r, c_g, c_b;
   
 	if ( map_lednum_to_channels(lednum, &c_r, &c_g, &c_b) > 0 ) {
-    ledbuffer[c_r] = red;
-    ledbuffer[c_g] = green;
-    ledbuffer[c_b] = blue;
-  }
+		led1642gw_set_channel(c_r, red);
+		led1642gw_set_channel(c_g, green);
+		led1642gw_set_channel(c_b, blue);
 	}
 
+}
 
+void led_set_hsv(uint8_t lednum, uint16_t hue, uint8_t saturation, uint8_t value)
+{
+	uint16_t red, green, blue;
+	
+	//Calculate hue
+	if ( hue < 61 ) {
+		red = 255;
+		green = ( 425UL * hue ) / 100;
+		blue = 0;
+	} else if ( hue < 121 ) {
+		red = 255 - ( ( 425UL * ( hue - 60 ) ) / 100 );
+		green = 255;
+		blue = 0;
+	} else if ( hue < 181 ) {
+		red = 0;
+		green = 255;
+		blue = ( 425UL * ( hue - 120 ) ) / 100;
+	} else if ( hue < 241 ) {
+		red = 0;
+		green = 255 - ( ( 425UL * ( hue - 180 ) ) / 100 );
+		blue = 255;
+	} else if ( hue < 301 ) {
+		red = ( 425UL * ( hue - 240 ) ) / 100;
+		green = 0;
+		blue = 255;
+	} else if ( hue < 360) {
+		red = 255;
+		green = 0;
+		blue = 255 - ( ( 425UL * ( hue - 300 ) ) / 100);
+	}
+
+	//Calculate saturation
+	uint8_t diff;
+	saturation = 100 - saturation;
+	diff = ( ( 255 - red ) * saturation ) / 100;
+	red += diff;
+
+	diff = ( ( 255 - green ) * saturation ) / 100;
+	green += diff;
+
+	diff = ( ( 255 - blue ) * saturation ) / 100;
+	blue += diff;
+
+	//Calculate value
+	red = ( red * value ) / 100;
+	green = ( green * value ) / 100;
+	blue = ( blue * value ) / 100;
+
+	led_set(lednum, red<<8, green<<8, blue<<8);
+}
+
+/*
+ * Write the data stored in the LED buffers via led_set().
+ */
 void led_flush(void)
 {
-  uint8_t channel;
-  for (channel=0; channel<NUM_LED1642GW_CHANNELS-1; channel++) {
-    write_no_command(ledbuffer[channel+0]);
-    write_no_command(ledbuffer[channel+NUM_LED1642GW_CHANNELS]);
-    write_data_latch(ledbuffer[channel+(2*NUM_LED1642GW_CHANNELS)]);
-  }
-  write_no_command(ledbuffer[NUM_LED1642GW_CHANNELS-1]);
-  write_no_command(ledbuffer[(2*NUM_LED1642GW_CHANNELS)-1]);
-  write_global_latch(ledbuffer[(3*NUM_LED1642GW_CHANNELS)-1]);
-
+	led1642gw_flush();
 }
 
 
-void ledcontroller_set_channel(uint8_t channel, uint16_t value)
+/*
+ * Clear the LED buffer.
+ * This function only affects the LED buffer, but not the LEDs, until
+ * you call led_flush().
+ */
+void led_clear(void)
 {
-  if (channel < NUM_LED_CHANNELS) {
-    ledbuffer[channel] = value;
-  }
-
+	led1642gw_clear();
 }
 
 
-void ledcontroller_clear(void)
+/*
+ * Initialize the leddriver.
+ * Must be called before any other function in this module.
+ */
+void led_init(void)
 {
-  memset(ledbuffer, 0x00, sizeof(ledbuffer));
-  led_flush();
+	led1642gw_init();
 }
+
+
+/*
+ * Turn all channels on on every LED1642GW IC.
+ * If you don't turn the channels on, led_set
+ * won't have any effect, and the LEDs will remain dark.
+ */
+void led_turn_all_on(void)
+{
+	led1642gw_turn_all_on();
+}
+
+
+void led_set_gain(uint8_t gain)
+{
+  if (gain > 0x3f) {
+    gain = 0x3f;
+  }
+  
+  led1642gw_set_gain(gain);
+  led1642gw_flush_config();
+}
+
+
+void led_set_current_mode(uint8_t mode)
+{
+  led1642gw_set_current_mode(mode);
+  led1642gw_flush_config();
+}
+
+

ledcontroller.h

@@ -14,19 +14,17 @@
 #define LEDCONTROLLER_H
 
 #include <avr/io.h>
-#include <compat/ina90.h>    // ==> _NOP()
 #include "timer.h"
 
-
-void ledcontroller_init(void);
+void led_init(void);
 void led_set(uint8_t lednum, uint16_t red, uint16_t green, uint16_t blue);
+void led_set_hsv(uint8_t lednum, uint16_t hue, uint8_t saturation, uint8_t value);
 void led_flush(void);
-void ledcontroller_turn_all_on(void);
-void ledcontroller_turn_all(void);
-void ledcontroller_set_channel(uint8_t channel, uint16_t value);
-void ledcontroller_clear(void);
-
-
+void led_clear(void);
+void led_turn_all_on(void);
+void led_turn_all_off(void);
+void led_set_gain(uint8_t gain);
+void led_set_current_mode(uint8_t mode);
 
 #endif // LEDCONTROLLER_H
 

main.c

@@ -23,21 +23,24 @@ int main(void)
 {
   
   timer_init();
-  //rtc_init(0);
+  rtc_init(0);
   //spi_slave_init();
-  ledcontroller_init();
+  led_init();
   sei();
-  //lcd_init();
 
-  DDRC |= (1<<PC5);
+  lcd_init();
+
+  DDRC |= (1<<PC5); // Test LED
+
+  DDRD  |= (1<<PD4); // Backlight
+  PORTD |= (1<<PD4);
+  
+  lcd_puts("RGByteclock");
+  lcd_locate(1,0);
+  lcd_puts("www.bytewerk.org");
+  
+  led_turn_all_on();  // turn all LED channels on.
   
-  /*
-  while (1) {
-    PORTC ^= (1<<PC5);
-    timer_wait(5000);
-    //_delay_ms(100);
-  }
-  */
   rgbyteclock();
   // rgbyteclock() should never end, but who knows...
   while (1) { ; }

rgbyteclock.c

@@ -1,65 +1,31 @@
 
-/*
- * ----------------------------------------------------------------------------
- * "THE BEER-WARE LICENSE" (Revision 42):
- * <struppi@struppi.name> wrote this file. As long as you retain this notice you
- * can do whatever you want with this stuff. If we meet some day, and you think
- * this stuff is worth it, you can buy me a beer in return.
- * (c) 2014 Stefan Rupp
- * ----------------------------------------------------------------------------
- */
-
-
-
 #include "rgbyteclock.h"
-#include "timer.h"
-#include "lcd.h"
-#include "ledcontroller.h"
 
 
 void rgbyteclock(void)
 {
-
-  ledcontroller_turn_all_on();
-
+	uint8_t gain = 0x2f;
+	led_set_gain(gain);
 	while (1) {
-    //PORTC ^= (1<<PC5);
-    for (int i=0; i<14; i++) {
-      led_set(i, 0x7ff, 0x00, 0x00);
+		
+		led_set(0, 4000, 0, 0);
 		led_flush();
-      timer_wait(100);
-    }
-    /* for (int i=0; i<14; i++) { */
-    /*   led_set(i, 0x00, 0x00, 0x00); */
-    /* } */
-    /* led_flush(); */
-    ledcontroller_clear();
-    timer_wait(100);
+		timer_wait(500);
 
-    for (int i=0; i<14; i++) {
-      led_set(i, 0x00, 0x7ff, 0x00);
+		led_set(1, 0, 10000, 0);
 		led_flush();
-      timer_wait(100);
-    }
-    /* for (int i=0; i<14; i++) { */
-    /*   led_set(i, 0x00, 0x00, 0x00); */
-    /* } */
-    /* led_flush(); */
-    ledcontroller_clear();
-    timer_wait(100);
+		timer_wait(500);
 
-    for (int i=0; i<14; i++) {
-      led_set(i, 0x00, 0x00, 0x7ff);
+		led_set(0, 0, 0, 0);
 		led_flush();
-      timer_wait(100);
+		timer_wait(500);
+
+		led_set(1, 0, 0, 0);
+		led_flush();
+		timer_wait(500);
+
+		PORTC ^= (1<<PC5); // Test LED
 	}
-    /* for (int i=0; i<14; i++) { */
-    /*   led_set(i, 0x00, 0x00, 0x00); */
-    /* } */
-    /* led_flush(); */
-    ledcontroller_clear();
-    timer_wait(100);
 	
 }
 
-}

rgbyteclock.h

@@ -14,7 +14,7 @@
 #define RGBYTECLOCK_H
 
 #include <avr/io.h>
-
+#include "ledcontroller.h"
 
 void rgbyteclock(void);
 

rtc.c

@@ -22,6 +22,11 @@ ISR(TIMER2_OVF_vect) {
   return;
 }
 
+/*
+ * initialize the RTC module
+ * this resets the internal time to the value given in the 
+ * rtc_time parameter
+ */
 void rtc_init(uint32_t rtc_time)
 {
   // Stop all interrupts

timer.c

@@ -46,7 +46,7 @@ void timer_init(void)
   // ==> let timer count to 77 to get (almost) 1kHz frequency
   // therefore:
   // - Set Timer/Counter0 prescaler to 256 ==> (1<<CS02)
-  // - Set OCR2 to 77
+  // - Set OCR0 to 77
   // - CTC ( i.e. clear counter, when COUNTER == OCR0A) ==> (1<<WGM01)
   // unfortunately, due to the 20MHz and the coarse prescaler dividers
   // provided, we can't get any closer to the desired frequency of